Most homeowners go for additional protection of their roofs against the fury of nature. Same is the case with the tin roofs as well. The tin roofs are susceptible to corrosion and hence, it is always a good idea to render an extra layer of protection to the base tin layer. Another layer of tin over the base layer must be installed in a proper way. Otherwise, it would fail to deliver the required efficiency and results.
Based on the type and design of the roofing tin panels, the course of action may vary. The two commonly available varieties of roofing panels are the corrugated panels and the flat roofing panels.
The tin roofing panels must be placed over one another to render another layer over the base layer. Make sure that the two panels overlap by at least two ripples or six inches. An overlap of two ripples is generally recommended for corrugated tin roof panels. On the other hand, the sheets should overlap by at least six inches in case of flat tin roofing panels.
Once the top roofing panel is aligned over the base tin sheet piece, move ahead with the proceedings. Make way for the roofing nails that would secure the upper panel to the base tin panels one by one. Select the top and bottom portions of the setup first to attach the setting in place. Follow it up by nailing the rest of the setup as well.
To enhance the strength and efficiency of the roof, use rubber rings around the roofing nails. Such a setup ensures the water-proofing ability of the tin roof layer and reduces the probability of water leaks and seepages.
Once the tin panels are attached to each other, you can choose one of the two options. Either you can cement and solder the panels or you can skip the step. The application of cement coupled with soldering becomes mandatory when the participating tin roofing panels are flat. The interlocked or corrugated tin roofing panels are attached strongly to each other due to their interlocking pattern. Hence, they don’t necessarily require application of cement or soldering.
One edge of the panels must be left unoccupied to make way for the third tin panel.
Keep an expert at your disposal throughout the length of the project.
Scott Rodgers is a renowned author who has been authoring on roofing contents for a long time now. His exemplary guidance has given motivation to a host of workers, ranging from San Bernardino Roofers to San Clemente Roofers.
Recent Comments